| Types of parking devices and its methods |
Multi floor cart parking system (PALLET-LESS TYPE) |
| Specifications of acceptable automobiles |
5100L ¡¿ 1850W ¡¿ 1600H ¡¿ 1850kg |
| Specifications of winding drive part |
Winding motor |
22kw ¡¿ 4P & D.C BRAKE |
| Winding deceleration machine |
HEICAL i = 1/33 |
| Winding speed |
45 ~ 60 m/min (proportional to the elevating distance) |
| Winding type |
WIRE ROPE (8 cores), 2:1 ROPING TYPE |
| Arrangement device of lift cage |
Arrangement method |
CHAIN & SIDE BAR CONVEYOR TYPE |
| Front stopper |
Hydraulic type stopper |
| Traveling motor |
1.5kw ¡¿ 4P & D.C BRAKE, 2set |
| Traveling speed |
80 ~ 120 m/min (proportional to the traveling distance) |
| Cart specifications |
Traveling type |
MC wheel direct drive type |
| Horizontal-moving motor |
0.75kw ¡¿ 4P & D.C BRAKE, 2set |
| Horizontal-moving speed |
46 m/min (rated speed) |
| Loading motor |
0.75kw ¡¿ 4P & D.C BRAKE |
| Loading type |
Vehicle front wheel grasp by the jaw |
| Loading time |
6 seconds |
| Specification of electrical control section |
Motor controller |
IGBT INVERTOR |
| Operation control type |
PLC type (basic) |
| Operation type |
TOUCH SCREEN or COMPUTER (optional) |
| Power |
Power source |
3©ª, AC 380V, 60Hz and 3©ª, AC 220V, 60Hz |
| Rotating speed |
Single phase, AC 380V, 60Hz |
| Auto door for the entrance/exit door |
2600W ¡¿ 1800H 2 UP SLIDE |
| Safety device |
Guide light of entry door and inside guide light, vehicle guide mirror
Vehicle position detection sensor on the entry floor
Front section of winding wire detection section
Prevention system of lifter and cart over-run
Emergency stop system |
